Washdown pumps are generally used for cleaning your boat on the water. Washdown pumps are totally different from our household pumps. The pump water is not suitable for drinking because it mechanisms with Nitrile elastomers. The purpose of a washdown pump is deck washing and anchor cleaning. If you are new at using a saltwater washdown pump, then you are in the right place. Read further to learn more about the washdown pump. To run your washdown pump properly, you need to follow some rules that can make the saltwater washdown pump work perfectly.
7 Tips That Can Make Saltwater Washdown Pump Work Perfectly
Here we have pointed out some tips below that can make the saltwater washdown pump work perfectly. These are-
Insertion of the Pump in the Right Place
Try to place your pump in the right place. For a better pump, water supply is a vital point. The pump will give its best if the pump placement and the water inlet connection works smoothly. Always store water according to the size of your boat. If not so there may be possibilities of corrosion. The better way to install your pump near the thru-hull and make sure the power source is nearby.
Utilization of Water
As you will use your pump not only in brine water but also in freshwater. As a result, you need to be choosy with your pump. Most washdown pumps are designed for pumps both in saltwater and freshwater. There are plenty of options in the market for sure you will have your desired one. If you don’t have much knowledge about the pump, you should ask a professional.
Picking up the Right Pump
The most crucial and important part is choosing the right pump. It is not easy for beginners. But it is not a tough job either. Here we have mentioned some tips that you can follow before buying a saltwater washdown pump. These are-
- In a per minute, a normal saltwater washdown pump can pump 2.5 to 12 gallons. It increases and decreases with the features and quality of the pump.
- Check the pressure of the pump. A standard pump water pressure is around 60 to 70 PSI.
- It becomes easy for you if your washdown pump can pump away the dirt as early as possible. The speed should be around 3.5 to 5 GPM.
- The washdown pump gets rusty when it is in the touch of seawater. As a result, it may stop working or may damage. Your pump should protect against corrosion.
- Try to buy a low noise producing pump.
Your Pump Must-Have Thru-hull
The function of the thru-hull is stopping the water supply immediately after the work is finished. So make sure that your seawater washdown pump must have a thru-hull.
Examine Your Pump before Installation
If your washdown pump is properly updated, but if you do a wrong installation, then it will not work properly. If you want a flawless cleaning with the pump, then examine it before installation.
- Read the manual first and follow the instructions.
- Connect the cable with a 20-amp circuit breaker and use a simple wire.
- The hose should be stuck tightly with clamps. If you are not able to do so, take professional help.
Try to Use Strainer
If you want your washdown pump to work perfectly, you have to place a strainer between the hydraulic machine and the water supply. It will help to strain the floating marine lumbers and objects. Staining will save your pump and boat from unwanted objects.
For Safety Purpose Use Sealing
Check your hose that should not coil up. Try to avoid any leaks and drills and use sealing. At the time of installation, try to circumvent the collision of the wires and the hose. These tips will help you to run your saltwater washdown pump perfectly. It will help you to clean your boat with ease.
Cleaning your boat is not easy work. For your help, if you haven’t installed a washdown pump in your boat, do it as early as possible. It will decrease your work. Hope this article has helped you much to know about washdown pumps, and how they work properly. Following these tips can make your washdown pump work perfectly.
You Must Also Read