Learn How To Replace Kitchen Faucet

You want to update the look of your kitchen faucet that has been old. Recently you bought a new faucet but you don’t know how to replace it. You’re looking for some tips and we’re here to assist you so that you can replace them successfully. You’ve come to the right place and today we’re going to discuss how to replace a kitchen faucet.

The installing system may seem too hard but if you follow all the below steps will be easy and it will take less than two or two and half hours to complete the replacing faucet.

Replacing a faucet is a straightforward project, turning off the water supply, remove the faucet, and install the new faucet. But there are many types of the faucet and depends on your faucet type. To get more information about different types of faucets, you may search online. Or, click here to find out your desired faucet to avoid any costly and time-consuming mistakes. Whichever type of faucet you may choose but you should select according to your sink. Before buying a faucet check how many holes are in your sink.

The tools you will need to replace the new or existing kitchen faucet:

Required Tools

  • Wrench set
  • Adjustable wrench
  • Pipe wrench
  • Slip joint pliers
  • Hammer
  • Handsaw
  • Tube cutter
  • 4-in-1 screwdriver

Required Materials

  • New faucet
  • P-trap
  • Shut-off valves
  • 150-grit sandpaper
  • Braided stainless steel supply tubes

Here we’re going to provide you with step-by-step instructions on how to replace a kitchen faucet. Hope you’ll be able to make the job easier.

Step 1

There you may find three or four holes to replacing the place but depends on your new faucet. For replacing the facet take a picture previous construction of your faucet so that you can install it easily showing the pic. It will be easy if you read the instruction manual page and you may find the page with the buying a package.

Step 2

You have to remove your old faucet with the help of a basin wrench. Close the water valve at the bottom of the sink. Turn on the call to relieve pressure on the lines. If applicable, turn off the power and disconnect the supply lines. Remove the bolts, unscrew nuts and sprayer from the sink that held the old faucet.

Step 3

Once you’ve removed the old faucet then take your new faucet and be ready for installing. To install the faucet correctly, place all the supply lines into the holes, and after setting the faucet use a basin wrench to tighten the nuts. Tighten all the nuts and screws but don’t tighten them too much tight. If you tighten too much it causes damage and maybe next time will difficult to loosen them.

Step 4

Attach faucet supply lines and tighten everything down also ensure they’re tightened. Next is you may turn the water back on after ensuring the new faucet is securely seated on your sink top. Now you can turn on and enjoy your new faucet.


You can do it yourself easily following all the above steps and it’s easy. Here is a summary on that like take a picture of previous kitchen faucet setting construction and read the manual page. Remove the old faucet and prepare the new faucet and install it. For replacing new faucet if you are unable to do it you may call a professional plumber. If you face any unexpected problems and difficult to reach nuts and poor access to fittings the professional plumber can assist you. So, there is no reason to be worried about replacing a kitchen faucet.

Also, here you’re getting the solution of how to replace kitchen sink faucet handles. For installing the handles or replacing you must shut off the water under the kitchen sink and shut-off valves. Make sure the water is off by turning it on and then unscrew the supply tube nut. Hold the handle and using a wrench unscrew all the nuts. Using a basin wrench turn them counterclockwise and after removing the old or new faucet replace the faucet that you want to replace or install above the sink. Lastly, clean off the surface of the sink and carefully remove all the putty or caulking from the sink area. Finally, you are ready to get better service after replacing the kitchen faucet.


We hope you can do the job yourself by following our easy steps and it might not sound easy to replace the kitchen faucet if you’re a beginner or the first in this job.

Anyways, if you’ve any further questions about how to replace a kitchen faucet, do comment below and let us know. We’ll be glad to help you Good luck and go ahead.

You Must Also Read

Top Ten Kitchen Gadgets

Leave a Reply

Your email address will not be published. Required fields are marked *